Operation; Set Up The System; Set Up Id Code - JTS in64r User Manual

Music
Life

5. Operation

06
INFINITY

1. Set up the system

Turn on the power of the receiver
A)
Switch the "Power Switch"
Key will light up.
5
Turn on the power of the transmitter
Hold the "Power Switch"
will light up.
Mute Function
After the transmitter's power is on, short pressing the "Power Switch "
will mute the microphone. Press the "Power Switch" again will re-activate
the microphone.
Notice: You have to hold the "Power Switch" for 3 seconds in order to turn
Put the antennas
B)

2. Set up ID code

In order to match one receiver to only one transmitter, IN64 is designed
with" ID code". If and only if both ID codes of a receiver and a transmitter
match each other, the "REMOSET" function works. There are 100 ID codes
available.
Receiver
A) Press "Set" button
B) Press "Set" twice to enter "ID Code"
setting window. (Figure 2)
C) Press " Up" or
a distinct ID code from "id 0" to "id 99"
D) After setting, press "Set" again to save the
settings.
2
to "ON". The "LCD Panel"
for 3 seconds. The "LCD Display"
17 23
in a vertical position
1
3
Down" button to select
4
and "REMOSET"
12 18
17 23
Figure 2