Advanced Functions - APRILIA tuono v4 Owner's Manual

With the vehicle in motion the chronometer functioning is controlled by means of the
MODE control central button.
Press the central button briefly to start the chronometer. Timekeeping starts when the
button is pressed. If the button is pressed again within 15 seconds after starting time-
keeping, the chronometer is reset. After that time, and if the button is pressed again,
the data is stored and the next timekeeping begins.
Timekeeping is cancelled by pressing and holding down the central button, or when
speed goes back to zero; the display shows the last timekeeping. Timekeeping starts
again following the steps described above.
Once 40 timekeeping sessions have been acquired, acquisition stops and the mes-
sage "FULL" is shown on the digital display. A new series of timekeeping can be
started again only after deleting previous times stored by means of the MENU of the
instrument panel advanced functions.

Advanced functions (02_26, 02_27, 02_28, 02_29, 02_30, 02_31,

02_32, 02_33, 02_34, 02_35, 02_36)
MENU (a-PRC)
The configuration menu is accessible with the vehicle at a standstill by pressing and
holding the MODE button, directly via the menu screen page, and contains the fol-
lowing functions:
- EXIT
- SETTINGS
02_26
- A-PRC SETTINGS
- CHRONOMETER
- CALIBRATION
- DIAGNOSIS
- LANGUAGES
32