Enerzone Destination 1.6 Installation And Operation Manual page 26

The glass gaskets (A) and (B) must be centred on the top and bottom edges of the glass. To do this
easily, peel back a section of the paper covering the adhesive and place the gasket on a table with
the adhesive side up. Stick the end of the gasket to the edge of the glass, then press the edge of
the glass down onto the gasket, taking care that it is perfectly centred on the gasket. Peel off more
of the backing and press the next section onto the gasket. Do not stretch the gasket as you place
it. Now pinch the gasket to the glass in a U shape. Cut exceeding gasket, if any. Do the same for
the other side.
26
Destination 1.6 Installation and Operation Manual