Table of Contents
Advertisement
68 Chapter 4 Configuring devices
Importing configurations from network devices
You can import configuration data directly from Nortel Networks devices on your
network. Importing a device from the network requires you to enter the device's
IP address (or associated name). Some devices also require a community string
and one or more passwords. You have two choices:
•
•
Specifying network device information in the Import dialog box
To import a configuration directly from a device on the network:
1
2
314790-D Rev 00
Enter device information in the import dialog box. See
device information in the Import dialog
Save the device information in an ASCII file and specify the file name in the
Import from Network dialog box. See
device list" on page
70.
In the navigation pane, select a destination folder for the device configuration
data.
Note: The destination folder must be Configuration Data or one of its
subfolders.
Open the Import from Network dialog box, shown in
one of the following ways:
•
Choose Configuration > Import > From Network.
•
On the toolbar, click Import, and then click Network in the Import Source
dialog box.
"Specifying network
box".
"Importing configurations from a
Figure 30 on page
69, in
Advertisement
Table of Contents
