Nortel 8003AC Installation Manual page 82

82 Installing Metro Ethernet Routing Switch 8600 modules and connecting equipment
Procedure steps
Step
1
2
3
4
Copyright © 2005-2007, Nortel Networks
.
CAUTION
Electrostatic discharge can damage hardware.
Action
Locate the slot where you want to install the module.
Remove the installed module or the filler panel.
For instructions, see
a filler panel" (page
Make sure that the insert/extract levers are extended away from
the front of the module (see
8003, 8006, and 8010 chassis" (page 79)
from the chassis: 8010co chassis" (page
Slide the module into the slot using the slot module guides
("Installing a module: 8003, 8006, and 8010 chassis" (page 82)
"Installing a module: 8010co chassis" (page
Installing a module: 8003, 8006, and 8010 chassis
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
"Removing a module" (page 76)
73).
"Ejecting the module from the chassis:
or "Removing
or "Ejecting the module
80)).
83)).
or