Table of Contents
Advertisement
The 8683XLR module supports R and M mode. For specific R and M mode
configuration requirements, see
24)
8683XZR module
The 868XZR module supports both LAN and WAN operation (10.3 Gb/s LAN
PHY and 9.9 Gb/s WAN PHY). The 8683XZR module
(page
factor pluggable (XFP) transceivers. The port operates in full-duplex mode.
The 8683XZR module includes three forwarding engine lanes. Each lane
supports 10 Gb/s bidirectional traffic. All three ports can run concurrently
at 10 Gb/s.
Nortel recommends that you install only one 10GBaseZR/ZW on the 8683XLR
and 8683XZR due to cooling limitations. Nortel further recommends that you
install the XFP only in port 1. You can install a 10GBaseSR, -LR/LW, or -ER/EW
in one or both of the remaining ports.
8683XZR module
The 8683XZR module supports up to three 10 Gigabit Ethernet small form
factor pluggable (XFP) transceivers.
Nortel qualified the XFPs listed in
8683XZR qualified XFPs
XFP order number
AA1403005
AA1403001
AA1403003
AA1403006
Copyright © 2005-2007, Nortel Networks
.
R mode supports R modules only.
and
"M mode configuration requirements" (page
61)) provides three bays for installing 10 Gigabit Ethernet small form
XFP type
10GBaseSR/SW
10GBaseLR/LW
10GBaseER/EW
10GBaseZR/ZW
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
"R mode configuration requirements" (page
ATTENTION
"8683XZR qualified XFPs" (page
8683XZR module 61
23).
("8683XZR module"
61).
Advertisement
Table of Contents
