Table of Contents
Advertisement
78 Installing Metro Ethernet Routing Switch 8600 modules and connecting equipment
4
5
Copyright © 2005-2007, Nortel Networks
.
For a CPU module, the online LED will be off or amber when the
CPU module is disabled.
Disconnect any cables attached to the ports on the module.
CAUTION
Do not operate the Metro Ethernet Routing Switch 8600
with an empty module slot. If you need to replace a failed
module and you do not yet have a replacement module,
leave the failed module installed or install a filler panel.
Using a Phillips screwdriver, loosen the two captive screws that
secure the module to the chassis
8003, 8006, and 8010 chassis" (page 78)
the module: 8010co chassis" (page
Loosening screws on the module: 8003, 8006, and 8010 chassis
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
("Loosening screws on the module:
or
"Loosening screws on
79)).
Advertisement
Table of Contents
