8648Gtr Module - Nortel 8003AC Installation Manual

Ethernet routing switch
Table of Contents

Advertisement

44 Metro Ethernet Routing Switch 8600 modules
The 8632TXE module does not support R or M mode. The 8632TXM
module supports R and M mode. For specific R and M mode configuration
requirements, see
mode configuration requirements" (page

8648GTR module

The 8648GTR module
10/100/1000BaseTX ports using 8-pin module (RJ-45) connectors. Each
port operates either at 10 Mb/s, 100 Mb/s, or 1000 Mb/s (1 Gb/s) and
supports the IEEE 802.3ab standard. You can obtain distances of up to 100
meters with category-5 unshielded twisted pair (UTP) cable.
8648GTR module
The 8648GTR module ports supports the IEEE 802.3 1998 Clause 28
autonegotiation standard. Each port can operate in full- or half-duplex
mode. When a port is connected to another device that also supports the
IEEE 802.3 1998 Clause 28 autonegotiation standard, the two devices
negotiate the highest possible data rate and the duplex mode of operation.
"8648GTR module LEDs" (page 44)
module LEDs.
8648GTR module LEDs
Copyright © 2005-2007, Nortel Networks
.
"R mode configuration requirements" (page 24)
("8648GTR module" (page
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
23).
44)) provides 48
shows the location of the 8648GTR
and
"M

Advertisement

Table of Contents
loading

This manual is also suitable for:

8004ac8005ac8005dc8004dc8600

Table of Contents