Figure 3-37. Atm Mda Configuration Screen - Nortel 10BASE-T Using Manual

Unit:
Hardware Version:
Software Version:
Hardware Type:
Port A1 MAC Address:
Port A2 MAC Address:
LEC Fail Over:
LECS Address Method:
User Defined Address:
[ 39-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 ]
UNI Version:
PHY Type:
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-37. ATM MDA Configuration Screen
Table 3-33
Table 3-33. ATM MDA Configuration Screen Fields
Field
Unit
Hardware Version
Software Version
Hardware Type
309985-C Rev 00
ATM MDA Configuration
[ 1 ]
12
49.0.0.0
OC3 2 Port MMF
00-60-fd-bb-0c-65
00-60-fd-bb-0c-66
[ Disabled ]
[
Configurable
------------------
[ 3.1
[ SONET
describes the ATM MDA Configuration screen fields.
Description
Allows you to select another stack unit that is configured with an ATM MDA. To view
or configure another ATM MDA, type its unit number and press [Enter], or press the
spacebar to toggle the unit numbers. This field appears only if the ATM MDA is
installed in a switch that is part of a stack configuration.
Read-only field that indicates the current hardware version of the selected ATM MDA.
Read-only field that indicates the current software version of the selected ATM MDA.
Read-only field that indicates the type of ATM MDA that is currently selected.
ATM Forum ]
In Use
----------------
] 3.1
] SONET
Press Ctrl-C to return to Main Menu.
Using the Console Interface
(continued)
3-89