Atm Configuration Menu - Nortel 10BASE-T Using Manual

ATM Configuration Menu

The ATM Configuration Menu screen
appropriate screen to configure or upgrade your BayStack 450-2M3/2S3 MDA.
Note: Your BayStack 410-24T switch does not support ATM MDAs; however,
this screen appears if your BayStack 410-24T switch is a stack member, and
only if an ATM MDA is installed in any stack unit. See Using the BayStack
450 10/100/1000 Series Switch (Part number 309978-C) for ATM details.
Note: The BayStack 450-2M3/2S3 MDA does not support the Business Policy
Switch. BayStack 450 switches that are configured with BayStack 450-2M3/
2S3 MDAs will not operate in a mixed-stack configuration that includes one or
more Business Policy Switches.
Choose ATM Configuration (or press a) from the Switch Configuration Menu
screen to open the ATM Configuration Menu.
Use arrow keys to highlight option, press <Return> or <Enter> to select option.
Press Ctrl-R to return to previous menu.
Figure 3-35. ATM Configuration Menu Screen
309985-C Rev 00
ATM Configuration Menu
LEC Configuration...
ATM MDA Configuration
MDA Software Download...
Return to Switch Configuration Menu
Press Ctrl-C to return to Main Menu.
Using the Console Interface
(Figure 3-35) allows you to select the
3-83