Table of Contents
Advertisement
Rate Limiting Configuration
The Rate Limiting Configuration screen allows you to limit the forwarding rate of
broadcast and IP multicast packets.
Figures
Configuration screens.
Note: If a port is configured for rate limiting, and it is a MultiLink trunk
member, all trunk member ports implement rate limiting. Also, if a trunk
member is implementing rate limiting and the port is disabled from rate
limiting, all trunk members are disabled from rate limiting.
Choose Rate Limiting Configuration (or press l) from the Switch Configuration
Menu screen to open the Rate Limiting Configuration screen.
Port
Packet Type
----
-------------
1
[ Both
2
[ Multicast ]
3
[ Both
4
[ Both
5
[ Broadcast ]
6
[ Multicast ]
7
[ Both
8
[ Both
9
[ Multicast ]
10
[ Both
11
[ Both
12
[ Both
13
[ Both
14
[ Both
Press Ctrl-N to display choices for additional ports..
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-29.
Rate Limiting Configuration Screen (1 of 2)
309985-C Rev 00
3-29
and
3-30
show sample rate limiting values for the two Rate Limiting
Rate Limiting Configuration
Unit:
Limit
Last 5 Minutes
--------
--------------
]
[ None ]
[
9%
]
]
[ None ]
]
[ 10%
]
[ 10%
]
[ 10%
]
]
[ 10%
]
]
[
5%
]
[ None ]
]
[ None ]
]
[ None ]
]
[ None ]
]
[ None ]
]
[ None ]
[ 1 ]
Last Hour
---------
56.0%
22.0%
30.0%
27.0%
25.0%
24.0%
72.0%
33.0%
35.0%
54.0%
96.0%
45.0%
86.0%
67.0%
58.0%
44.0%
11.0%
87.0%
27.0%
89.0%
15.0%
66.0%
12.0%
98.0%
44.0%
33.0%
34.0%
45.0%
Press Ctrl-C to return to Main Menu.
Using the Console Interface
Last 24 Hours
-------------
23.0%
55.0%
67.0%
55.0%
78.0%
87.0%
60.0%
70.0%
65.0%
44.0%
66.0%
99.0%
89.0%
76.0%
More...
3-69
Advertisement
Chapters
Table of Contents
