Stack Operation - Nortel 10BASE-T Using Manual

Stack Operation

BayStack 410-24T switches provide fail-safe stackability when you install
(optional) BayStack 400-ST1 Cascade Modules.
The BayStack 400-ST1 Cascade Module supports the following switches
•
•
•
You can create a mixed stack of supported switches, but certain restrictions apply:
As shown in
410-24T switches must use compatible but device-specific software versions to
operate with the Business Policy Switch.
Mixed stack configuration
Business Policy Switch
Business Policy Switch
Business Policy Switch
Business Policy Switch
Figure 1-10.
1 The terms "Nortel Networks Business Policy Switch 2000" and "Business Policy Switch" are used
synonymously in this guide.
309985-C Rev 00
Nortel Networks Business Policy Switch 2000
BayStack 450 Switch
BayStack 410-24T Switch
Figure 1-10, in a mixed stack configuration, the BayStack 450 and
BayStack 450
BayStack 450
BayStack 410-24T
BayStack 410-24T
Compatible Software Versions
Introduction to the BayStack 410-24T Switch
™
A Business Policy Switch must
be assigned as the Base Unit
Same software
versions
Same software
versions
:
1
All stack units
must have the same
Interoperability Software
Version Number (ISVN)
BS45083A
1-27