Mac Address Table - Nortel 10BASE-T Using Manual

MAC Address Table

The MAC Address Table screen
that the switch has learned or to search for a specific MAC address.
The MAC Address Table screen also operates in conjunction with the Port
Mirroring Configuration screen. When you configure a switch for MAC
address-based port mirroring, you can use the MAC Address Table screen to find
an address, and enter the address directly from this screen. You can enter
addresses from either screen, but you must return to the Port Mirroring
Configuration screen to activate the feature (see
on page
Note: This screen does not refresh dynamically to show new entries. To
refresh the screen, press [Ctrl]-R to return to the previous menu.
Choose MAC Address Table (or press m) from the Switch Configuration Menu
screen to open the MAC Address Table screen.
Port Mirroring Address A:
Port Mirroring Address B:
00-60-FX-00-02-30
00-00-AX-85-2X-26
00-60-XX-12-02-15
00-08-FX-1D-4X-38
End of Address Table.
Press Ctrl-R to return to previous menu.
Figure 3-7. MAC Address Table Screen
309985-C Rev 00
3-65).
MAC Address Table
Aging Time:
Find an Address:
Port: 1
Port: 1
Trunk:3
Press Ctrl-P to see previous display.
(Figure 3-7) allows you to view MAC addresses
"Port Mirroring
[ 300 seconds ]
[ 00-00-00-00-00-00 ]
[ 00-44-55-44-55-22 ]
[ 00-33-44-33-22-44 ]
Press Ctrl-C to return to Main Menu.
Using the Console Interface
Configuration"
3-21