Nortel 10BASE-T Using Manual page 77

PVID = 2
Key
Figure 1-26.
The broadcast domain for each of the VLANs shown in
configuring VLAN port memberships for each VLAN and then configuring each
of the ports with the appropriate PVID/VLAN association:
•
•
•
The following steps show how to use the VLAN configuration screens to
configure the VLAN 3 broadcast domain shown in
309985-C Rev 00
S1
Port 2 Port 4 Port 10
V2 V2 V2
VLAN 1 (PVID = 1)
VLAN 2 (PVID = 2)
VLAN 3 (PVID = 3)
VLAN Broadcast Domains Within the Switch
Ports 8, 6, and 11 are untagged members of VLAN 1.
The PVID/VLAN association for ports 6 and 11 is: PVID = 1.
Ports 2, 4, 10, and 8 are untagged members of VLAN 2.
The PVID/VLAN association for ports 2, 4, and 10 is: PVID = 2.
Ports 2, 4, 10, 8, 6, and 11 are untagged members of VLAN 3.
The PVID/VLAN association for port 8 is: PVID = 3.
Introduction to the BayStack 410-24T Switch
VLAN 3
VLAN 2 VLAN 1
Port 8
PVID = 3 PVID = 1
V3
Figure
Port 6 Port 11
V1 V2
BS41024A
Figure 1-26 is created by
1-26.
1-47