Atm Mda Configuration - Nortel 10BASE-T Using Manual

Using the BayStack 410-24T 10BASE-T Switch
Table 3-32. LEC Configuration Screen Fields
Field
Actual Physical
Port
LEC Fail Over

ATM MDA Configuration

The ATM MDA Configuration screen
configuration parameters for your BayStack 450-2M3/2S3 MDA.
Certain fields in this screen may require you to reset the switch if you change the
current or default value for another value. The reset option is always preceded by a
screen prompt. Enter Yes to reset the switch; enter No to abort the option.
You can also use this screen to view the current BayStack 450-2M3/2S3 MDA:
• Hardware version
• Software version
• Hardware type
• MAC addresses for physical ports A1 and A2
Choose ATM MDA Configuration (or press a) from the ATM Configuration Menu
screen to open the ATM MDA Configuration screen.
3-88
Description
This read-only field displays the actual physical port for the selected LEC.
Default A1
Range A1, A2
This read-only field displays the LEC Fail Over setting for the ATM MDA. You can set
the LEC Fail Over field using the ATM MDA Configuration screen (see
Configuration" on page
(continued)
3-88).
(Figure 3-37) allows you to set up ATM
"ATM MDA
309985-C Rev 00