Figure 1-25. Connecting The Power Cable To The Arn - Nortel Passport ARN Routers Installation And Operating

Installing and Operating Passport ARN Routers
To power outlet
Figure 1-25.
Connect the remote end of the power cable to a grounded outlet.
2.
Note: For information about connecting a redundant power supply to the
ARN, refer to the documentation that came with your power supply.
1-30
Power switch (off)
100-240~
50-60Hz
Connecting the Power Cable to the ARN
U L
U L
1.2A
To redundant power supply
Redundant Power
ARN0017A
114200-E Rev 00