SynOptics 3395 Using Manual page 99

TELNET CONNECT
Examples
These examples show how you can use the TELNET CONNECT command with
different keywords and variables to establish a session with a Telnet destination.
Example 4 shows a TN3270 connection.
1 . This command uses the domain name FINANCESUN.SYNOPTICS.COM.
TS3395>
TS3395
2 . This command has no domain name or Internet address. In the absence of this
information, the terminal server searches for a predefined preferred destination. In
this example, the preferred destination is a Telnet host named
ACCOUNTSHOST.COM.
TS3395>
TS3395
If the network manager has not defined a preferred destination, the message
Preferred service has not been defined appears on the screen. If this happens, see
your network manager, or enter a TELNET domain name with the TELNET
CONNECT command.
3 . This command uses the Internet address 128.10.2.30 and the Telnet port number 23.
TS3395>
TS3395
4 . This command uses a Telnet domain name to reach an IBM host. Once the
connection is established, the terminal emulates an IBM 3278 style terminal, and
the terminal's keyboard responds like the IBM keyboard.
TS3395>
TS3395
3-74
telnet connect financesun.synoptics.com
-010- Session 4 to FINANCESUN.COM established
Welcome To FINANCESUN
Please log on.
telnet connect
-010- Session 5 to ACCOUNTSHOST.COM established
This is ACCOUNTSHOST.COM
Please enter your username:
telnet connect 128.10.2.30:23
-010- Session 6 to 128.10.2.30:23 established
Welcome to DevelopmentSUN.COM
Please log on.
telnet connect ibmhost.com
-010- Session 3 to IBMHOST.COM established
This is IBMhost.COM
Username:
893-386-B