SynOptics 3395 Using Manual page 125

7. Exit from the file transfer program on the host and terminate the session with the host.
To end the file transfer session, Chris first enters the Kermit FINISH command at the PC to notify the
host that he has no more files to transfer. Then he connects to the Kermit program on FinanceVAX ,
and shuts it down. He then logs off of FinanceVAX.
Kermit-MS> connect
Kermit-32>
Kermit-32> exit
$
$ LOGOFF
TS3395>
TS3395> logout
TS3395>
8. Exit from the file transfer program on the PC.
Chris logs out of the terminal server and the PC Kermit prompt appears on the screen. He then exits
from PC Kermit.
TS3395> logout
Kermit-MS>
Kermit-MS> exit
C:\>
You can use this method to transfer a file between any personal computer or workstation and any host. If
the target device is another PC, however, the PC must be defined as a LAT service and it must already be
running Kermit in terminal server mode.
893-386-B
Transferring Files
6-5