Related Manuals for SynOptics 5390
Summary of Contents for SynOptics 5390
- Page 1 Release Notes for the Model 5390 Communications Server EPROM Kit SynOptics Communications, Inc. 4401 Great America Parkway Santa Clara, CA 95054 408-988-2400 October 1994 *896-071-A*...
- Page 2 © 1994 by SynOptics Communications, Inc. All rights reserved. Trademarks SynOptics and SynOptics Communications are registered trademarks of SynOptics Communications, Inc. Other brand and product names are registered trademarks or trademarks of their respective holders. Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, SynOptics Communications, Inc.
- Page 3 Benutzer ist für den Erwerb der entsprechenden Kabel verantwortlich. Certificate of the Manufacturer/Importer It is hereby certified that the Model 5390 Communications Server has been suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, test transmitters) in accordance with the regulations may, however, be subject to certain restrictions.
-
Page 4: Electromagnetic Emissions
Consequently, when this equipment is used in a residential area or in an adjacent area thereto, radio interference may be caused to equipment such as radios and TV receivers. Compliance with the applicable regulations is dependent upon the use of shielded cables. The user is responsible for procuring the appropriate cables. -
Page 5: Related Publications
For more information about the issues raised in these release notes, refer to the following publications about the Model 5390 Communications Server: New Features The Model 5390 EPROMs provide the following additional features. IPX Command You can use the IPX command to set a number of parameters associated with IPX booting and dumping. - Page 6 -d parameter, the current settings for the parameters are listed. This command has no effect on releases of the Model 5390 server before release 9.0. For more information on this command, refer to Using FastLink for...
-
Page 7: Ping Command
-d parameter, the current settings for the parameters are listed. For more information on this command, refer to Installing the Model 5390 Interface for VMS Environments and Administering the Model 5390 Interface for VMS Environments. -
Page 8: Bug Fixes
The following bugs have been fixed in the Model 5390 server. Constraints The Model 5390 server 9.0 images only run with 0803 EPROMs. The Model 5390 server 8.1 images only run on 0791 EPROMs. The EPROMs now correctly select a segment during dumping, if none is selected.