SynOptics 3395 Using Manual page 87

SHOW|LIST PORT
Status The current activity at this port. Some of the possible status messages do not appear
when you enter this command at your own port. These include Idle, Locked, Loading
Script, Finding Script, and Running Script. Other status messages that you might see
include these:
Status
Connected
Connecting
Disconnected
Disconnecting
Executing Cmd
Local Mode
Sessions
Current The session that you most recently interrupted when you entered
Service local command mode.
Current Node The name of the LAT service node or the Internet address of the Telnet node where the
current session is established.
Current Port The Telnet port number if the current session is a Telnet session.
Current Domain The domain name or Internet address of the Telnet destination if the current session is a
Telnet session.
Input XOFFed Whether XON|OFF flow control is enabled for data input to the port from your
terminal.
Output XOFFed Whether XON|OFF flow control is enabled for data output form the port to your
terminal.
Output Signals The modem control signals that the port asserts to your terminal.
Input Signals The modem control signals that your terminal asserts to the port.
Last Char Output The hexadecimal value of the last character that the port sent to your terminal.
Last Char Input The hexadecimal value of the last character that the port received from your terminal.
3-62
Means
The port is currently connected to a LAT service or Telnet
destination.
The port is currently attempting to connect to a LAT service
or Telnet destination.
The server disconnected the port from a session. (This may
happen if a session is inactive for a long period of time.)
The server is disconnecting a port from a session.
The port is executing a command from the terminal server
local command mode.
The port is logged on to the server and is in local command
mode.
The number of active sessions at this port.
893-386-B