SynOptics 3395 Using Manual page 74

Current Groups The names of the LAT service groups where you have chosen to have access. This list
may be the same or a subset of the authorized group list.
Enabled The characteristics either you or the network manager have enabled with
Characteristics the DEFINE|SET PORT commands. The characteristics that can appear
in this field include the following:
Characteristic
Autobaud
Autoconnect
Autodedicated
Autoprompt
Broadcast
Connectresume
Dial back
Dial up
893-386-B
Means
The port determines the input port speed, parity, and character
size for the device connected to it, and automatically sets the
appropriate port characteristics.
The port automatically connects to a dedicated service or a
preferred service when the user logs on to the port, or the port
attempts to reconnect a session when a connection failure
occurs.
The terminal server automatically logs on the port and
establishes a session between the port and a dedicated service
when the terminal server is initialized or the port is logged
out.
The terminal server automatically prompts the LAT service
node to run its logon routine when the port makes a
connection to that node.
The port can receive messages that are broadcast from other
ports on the terminal server.
The CONNECT command resumes an existing session rather
than establishing a new session when you enter the command
with a destination name where you already have a session
established.
The dial-back feature is enabled at this port. This feature limits
remote to the terminal server to a specific list of users and
phone numbers.
The port is connected to a dial-up line.
SHOW|LIST PORT
3-49