Zero Counters - SynOptics 3395 Using Manual

ZERO COUNTERS

Reset port counters to zero
The ZERO COUNTERS command resets the port counters to zero. Use the SHOW
PORT COUNTERS command to display the counters at your port.
N o t e s
Users at Secure and Nonprivileged ports can only reset the counters of their own ports.
These ports require that you use the PORT keyword and the port-list variable to specify
your port number.
The SHOW PORTS COUNTERS command displays the current values of all port
numbers, and the number of seconds that have elapsed since the port counters were last
reset to zero.
Syntax
ZERO COUNTERS
Abbreviation
Z C PO
Where Means
PORT Reset the counters at the port in the port-list variable to zero.
port-list Reset the counters of the port you specify in this variable to zero. Secure and
Nonprivileged users must specify their own port number.
Example
This command resets the counters on port 3 to zero.
TS3395> zero counters port 3
TS3395>
Related Commands
This command is useful with the ZERO COUNTERS command:
Command
SHOW PORT COUNTERS
3-78
PORT port-list
Function
Displays the current values for port counters.
893-386-B