SynOptics 3395 Using Manual page 51

SCRIPT
The terminal server's response to this command depends on the contents of the script
file. At some ports, the commands in the script appear on the screen as the terminal
server executes them. If the file contains a command such as CONNECT or RLOGIN,
the user might see the logon banner of a remote host. The script could contain
commands such as SET PORT TELNET TN3270 DEVICE to specify the type of
terminal emulation to run during a TN3270 session, or SET SESSION to change the
data transparency mode of a session. Unlike the CONNECT or RLOGIN commands,
these commands would not necessarily cause any visible response from the terminal
server.
If the terminal server cannot find the script file, or you do not have access to the script
file, an error message appears at your terminal. A message such as "Temporary
resource conflict - Please try again" may appear if many other users attempt to execute
the script file at the same time as you do. If this message appears, wait a few minutes
and then try again.
Related Commands
These commands provide information that is useful with the SCRIPT command:
Command
SHOW PORT ALTERNATE
CHARACTERISTICS
SHOW PORT STATUS
3-26
Function
Displays the PORT SCRIPT LOGIN characteristic.
Displays the name of the host which contains the
script file that was last executed a this port.
893-386-B