SynOptics 3395 Using Manual page 53

Terminal server
Hide thumbs Also See for 3395:
Table of Contents

Advertisement

SET PORT
Characteristics
[AUTOPROMPT]
[BACKWARD SWITCH]
[FORWARD SWITCH]
[LOCAL SWITCH]
[PAUSE]
[RESOLVE SERVICE]
3-28
Se t t i ng
Description
[ENABLED]*
Initiate a logon sequence when you establish a
[DISABLED]
session between your port PROMPT and a LAT
service node. The LAT service node must also
support this characteristic.
[character]
Reopen the next lower-numbered session during the
[NONE]*
current session, without returning to the Model
3395/3395A command interface when you enter
this character or control character sequence. If
NONE, do not enable a backward switch character at
this port. Use this keyword to disable a previously
defined backward switch character.
[character]
Reopen the next higher-numbered session during
[NONE]*
the current session, without returning to the Model
3395/3395A command interface when you enter
this character or control character sequence. If
NONE, do not enable a forward switch character at
this port. Use this keyword to disable a previously
defined forward switch character.
[character]
Suspend the current session and recall the terminal
[NONE]*
server local command mode when you enter this
character or control character character sequence.
You must set a local switch character to suspend
active sessions if your terminal does not have a
<Break> key. If NONE, do not enable a local
switch character at this port. Use this keyword to
disable a previously defined local switch character.
[ENABLED]
Pause the screen after displaying 24 lines of
[DISABLED]*
information from a SHOW|LIST command. When
enabled, the pause continues until you press the
<Return> key, and then the display scrolls the next
24 lines. When disabled, the display continuously
scrolls all information.
[ANY]*
Determine how the terminal server should interpret
[LAT]
a LAN destination name in these commands:
[TELNET]
CONNECT, TELNET CONNECT, LAT
CONNECT. These are valid RESOLVE SERVICE
keywords:
LAT
TELNET
ANY
Interpret the name as a LAT service.
Interpret the name as a Telnet domain
name or an Internet address.
Interpret the name as a LAT service
first, then as a Telnet destination if no LAT
service exists with that name.
893-386-B

Advertisement

Table of Contents
loading

This manual is also suitable for:

3395a

Table of Contents