SynOptics 3395 Using Manual page 57

SET PORT
Examples
None of these examples specify a port number since the commands apply to the issuing
port.
1 . This command to assigns a backward switch character.
In this example, a user sets the backward switch character to <Ctrl><K>. (When
you press the <Ctrl> key at the TS3395> prompt, the terminal displays the ^
character.)
TS3395> set port backward switch
TS3395>
2 . This command enables the pause feature.
TS3395> set port pause enabled
TS3395>
3 . This command changes the RESOLVE SERVICE characteristic. A user sets the
RESOLVE SERVICE characteristic to LAT. This causes the terminal server to
interpret LAN destinations in CONNECT commands from this port as LAT
services.
TS3395> set port resolve service lat
TS3395>
3-32
^p
893-386-B