Xconnect - SynOptics 3395 Using Manual

XCONNECT

XCONNECT
Establish a session with an XDM host
The XCONNECT command attempts to establish a session with an XDM host for
terminal servers with the Xremote protocol enabled.
N o t e s
Not all terminal servers have the Xremote protocol enabled. If it is enabled, you can
either provide the domain name or Internet address of an XDM host in the command
line, or simply enter the XCONNECT command. If you enter the command without
specifying a host, the terminal server searches the permanent database for a host that
was specified with the DEFINE PORT XDM host command, or uses the
BROADCAST query type.
Syntax
XCONNECT [ domain-name / internet-address ]
Abbreviation
XCO
Where Means
[domain-name] The domain name of the XDM host.
[internet-address] The Internet address of the XDM host.
Examples
1 . This command has no domain name or Internet address, and the terminal server
locates an XDM host.
TS3395> xconnect
Welcome to the Xwindow System
3-76
Login:
Password:
893-386-B