SynOptics 3395 Command Reference

Commands Reference Card
for the Model 3395/3395A
UNIX Operating System-like
Interface
S
ee Using the Model 3395/3395A UNIX Operating
System-like Interface for detailed information about
these commands.
The commands described with an asterisk (*) require
superuser mode. (See the su command.)
Command D e s c r i p t i o n
alias [name [word- Create and display command
list]] aliases.
arp -a | ip-addr | -d Display, delete, or create
ip-addr* | -s ip-addr entries in the Internet-to-
ethernet-addr* Ethernet translation table.
Initialize the terminal server.
boot* [-o]
[minutes] | -c | -d
Establish a job with a LAT
connect [service[-n
node-name] service.
[-d dest-name]]
connect [rhost [-p Establish a job with a Telnet
telnet - port-number]] destination.
dli [cmd] Open the Model 3395
command interface from the
ULI, and execute a Model 3395
command.
Terminate the ULI or disable
exit
superuser mode.
fg [%] | [%]job | Reopen a job.
host-name
Display information about
help [cmd[cmd]]
commands and keywords.
?
history [n] [-r [n]] Display a list of ULI events at
[-h [n]] your port.
Display a list of available
hosts
domain names.
Display and configure network
ifconfig -a |
interface [ip-addr] parameters.
[netmask net-mask]
[broadcast bip-
addr] *
Display a list of currently
jobs
active jobs.
Terminate one or more jobs.
kill [%] | [%]job |
-a
Temporarily suspend access to
lock
a port.
logout [-p port#] Terminate all jobs and log out
the port. (Only users at
superuser ports can log out
other ports.)
Manage line printers.
lpc* ? | help |
abort | clean |
create [-p
ports][args] |
delete | disable |
enable | exit |
quit | status
Display the contents of a
lpq -Pprinter
[job # ...] printer queue.
lprm* -Pprinter job#. Remove one or more entries
. . from the printer queue.
netstat [-n] | Display network statistics
-a[n] | -i[n] | collected by the
communications server.
-I[n] [interface] |
-r[n] | -s[n]
ping* [-l] rhost Use ICMP to generate a
response from a host.
Enable the Point-to-Point
ppp +
Protocol (PPP).
Display the service connection
queues [-a] |
-h host-name | queue.
-s service-name |
-p port-number |
-e entry
rlogin rhost Use the Rlogin protocol to
[-l username] establish a job with a remote
host.
services Display information about
LAT services.
-c[service-name] |
-s[service-name] |
-S[service-name]
Change and display the values
set
of the ULI variables.
[history=n] |
[ignoreeof=cnt] |
[prompt="string"]
slip +[c] Enable the SLIP or CSLIP
protocol.
Execute a script file.
source
/pathname/script-
name
stty [-a] | option Set and display port parameters
that control terminal
characteristics.
su [password] Gain access to superuser mode.
(Authorized users only)
telnet rhost Use the Telnet protocol to
establish a job at a Telnet
[telnet-port-number]
destination.
tn3270 rhost Use the Telnet protocol to
provide 3270 access to an IBM
[telnet-port-number]
host.
unalias name Delete the alias you specify.
Reset the values of ULI
unset history |
variables to their default
ignoreeof | prompt
values.
who [am i] Display the names and port
whoami numbers of all users on the
terminal server, or the current
user.
Establish an Xremote session.
xremote [rhost]