Connecting The Ip Phone 1535 To The Lan; Enabling The Lan Connection Proﬁle; Nortel Multimedia Communications Server 5100; Accessing And Modifying The Lan Network Settings - Nortel 5100 User Manual

Nortel networks ip phone user manual

Hide thumbs Also See for 5100:

Table of Contents

26 First time installation of the IP Phone 1535

Connecting the IP Phone 1535 to the LAN

Step

Enabling the LAN connection proﬁle

To establish an active network connection, you must conﬁgure the IP Phone

1535 to operate in either of two network connection proﬁles: LAN or WiFi.

The IP Phone 1535 is preconﬁgured to make a network connection using

LAN over an Ethernet switch or router. Thus, the LAN connection proﬁle is

enabled on the IP Phone 1535 by default.

Step

To conﬁgure the IP Phone 1535 with network settings particular to your LAN

environment, you must access and conﬁgure the parameters of the Network

Settings option. With the LAN Network connection proﬁle enabled, you can

access and conﬁgure the parameters of the Network Settings conﬁguration

options:

Select Logout, and press OK.

Action

Insert the RJ-45 cable into the LAN port at the back of the IP Phone

1535. For more information, see

Connect the other end of the LAN cable into an active LAN

connection port on the network.

Action

From the Main Menu, select Settings >Proﬁle and press OK.

Select LAN >Enable (the LAN connection proﬁle is enabled on the

IP Phone 1535 by default).

When asked to conﬁrm the change, select Yes to accept.

Nortel IP Phone 1535 Installation and Commissioning

NN43160-300 00.13 Preliminary

Release 4.0 22 August 2007

—End—

Table of Contents