Installation Guidelines; Connect The Handset; Connect The Ip Phone 1535 To A Power Source - Nortel 5100 User Manual

24 First time installation of the IP Phone 1535

Installation guidelines

Consider the following conditions when you choose a location in which to
install the IP Phone 1535:
•
•
•
•
•

Connect the handset

Step
1
2

Connect the IP Phone 1535 to a power source

Step
1
2
Copyright © 2007, Nortel Networks
.
Use the IP Phone 1535 in an environment with a temperature range of
+0 to 40 C and a relative humidity of 5 to 95 percent.
Place the IP Phone 1535 on a smooth, nonslip surface.
Do not install the IP Phone 1535 in a dusty environment; dust deposits
can adversely affect moving parts.
Do not install the IP Phone 1535 in a location directly exposed to
sunlight or radiant heat sources; these can cause damage to electrical
components.
The IP Phone 1535 does not support Power Over Ethernet (PoE);
therefore, do not install the phone on a PoE configuration.
Action
Insert one end of the coiled cord into the handset connector port.
This port is on the handset cradle side of the IP Phone 1535. For
more information, see .
Insert the other end of the coil cord into the port on the handset.
WARNING
Use only the power adapter supplied with the IP Phone 1535,
as other adapters can cause operating anomalies, hazardous
conditions, and material damage.
Action
Insert the power adapter DC plug into the DC power jack, at the rear
of the IP Phone 1535 phone base. For more information, see .
Connect the adapter AC plug into an appropriate AC voltage socket.
Nortel Multimedia Communications Server 5100
Nortel IP Phone 1535 Installation and Commissioning
NN43160-300 00.13 Preliminary
Release 4.0 22 August 2007
—End—
—End—