Configuring Voip Domain Name Information - Nortel 5100 User Manual

32 First time installation of the IP Phone 1535
Enabling STUN protocol
Step
1
2
Configuring the STUN server
Step
1
Configuring VoIP domain name information
In order for the IP Phone 1535 to connect to your installed IP telephony
services, you must access and configure the MCS 5100 network domain
name parameter.
Step
1
2
Copyright © 2007, Nortel Networks
.
be located using DNS to lookup the domain information of the service
provider.
Action
From the Main Menu, select Settings > VoIP Settings > Proxy
> STUN > Enable.
Press OK.
Action
From the Main Menu, select Settings > VoIP Settings > Proxy >
STUN > STUN Server.
Note: If the domain name is used, the STUN server domain
should be configured on the DNS server.
Action
From the Main Menu, go to Settings > VoIP Settings > Misc. >
Domain Name, and press OK to accept selection.
Enter the value for your network VoIP Server as required, and press
OK to confirm changes.
Nortel Multimedia Communications Server 5100
Nortel IP Phone 1535 Installation and Commissioning
NN43160-300 00.13 Preliminary
Release 4.0 22 August 2007
—End—
—End—
—End—