Connecting The Ip Phone To The Lan - Nortel 1140E User Manual

Connecting the IP Phone to the LAN

Follow this procedure to connect the terminal to the Local Area Network
(LAN), and to a power source.
Prerequisites
•
•
Step
1
2
3
4
Copyright © 2006, Nortel Networks
.
CAUTION
Risk of equipment damage
Do not plug the IP Phone into a regular telephone jack. This
causes severe damage to the terminal. Consult your system
administrator to ensure that you plug your telephone into a
10/100BaseT Ethernet jack.
IP Phones can be powered by an AC adapter or over a LAN. Contact
your installation technician to identify the correct power option.
See "IP Phone 1140E connectors" (page
connectors on the back of the IP Phone.
Action
Connect one end of the CAT-5 line cable to the LAN Ethernet port,
identified with a LAN icon, located on the underside of the terminal.
Connect the other end of the CAT-5 line cable to the IP network jack.
For a terminal sharing LAN access with a PC, connect a second
CAT-5 line cable to the PC Ethernet port located on the back of the
terminal, identified by the PC icon. Connect the other end of the
cable to the Ethernet port on the computer.
For a secure power connection, thread the cord around the strain
relief retaining hook and through the channel on the underside of
the terminal.
Secure the terminal footstand to the terminal base.
Nortel IP Phone 1140E User Guide
NN10300-023 01.02 Standard
(I)SN09U 20 October 2006
—End—
Carrier VoIP
20)for the location of the
Nortel Networks Confidential
19