Forwarding Calls - Polycom 320 User Manual

User Guide SoundPoint IP 330/320

Forwarding Calls

Note
3 - 12
To perform a blind transfer:
1. During a call, press the Trans soft key.
2. Press the Blind soft key.
3. Do one of the following steps:
Enter the number to which you want to transfer the call.
a
Press the Dir soft key to access the local contact directory, use
b
and to access the contacts, and then press
Press the Dir soft key to access the corporate directory, search for the
c
desired contact, and then press
Press the Callers soft key to access the Received Call list, use
d
and to access the contact, and then press
Press
e
to access the contact, and then press
At this point, the call is connected to the number to which you are
transferring them.
You can configure your phone so that all incoming calls are forwarded to
another party (known as static forwarding).
All incoming calls can be forwarded to another party while Do Not Disturb is
enabled on your phone. For more information, contact your system
administrator.
Call Forwarding is not available on shared lines.
This feature is local to the phone, and may be overridden by call server settings.
For more information, contact your system administrator.
to access the Placed Call list, use
.
.
.
and
.