Canceling Line Redirection; Allowing A Telephone To Redirect Calls - Nortel P0857846 System Coordinator Manual

If you use ALL to redirect all your lines, it is important that you wait
˙
until all the lines on your telephone light up before pressing
or OK. If you press
up, those lines not lit will not be redirected.
Tip -
lines can still be used normally when it is not busy
on a redirected call. To avoid redirection failing
because the chosen line is in use, choose a line
pool with several lines in it.
The system does not check that the number you
give for line redirection is a valid one. If you redirect
to an invalid number, redirection will fail. Using an
autodial button to enter the redirection number
helps avoid this possibility. An autodial button used
for line redirection must be programmed to use a
specific line.
ƒ£°›

Canceling Line Redirection

• Press
• Select the lines you no longer want to be redirected.

Allowing a telephone to redirect calls

You can turn a telephone's ability to redirect calls on and off.
You will need the programming template found at the front of this
guide. See Getting Started for more information. ƒ••¤flfl‹››
1. Press ¤‹fl›fl
2. Press
password). ≠
3. Press
you wish to program. ≠
4. Press "
5. Press
redirect:.
P0857846 Issue 02
˙
The line chosen for redirecting calls on other
.
(the default System Coordinator
and enter the internal number of the telephone
twice.
four times. The display shows Allow
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
Forwarding your calls / 75
or OK before all the lines light
ƒ£°›
.