Making A Call Using Call Log; Creating A Password To Your Call Log - Nortel P0857846 System Coordinator Manual

90 / Tracking your incoming calls
If you accidentally erase an item, you can retrieve it. ˙
• Press
an item.
®
• Press

Making a call using Call Log

You may find it helpful to place calls from within your Call Log. The
number stored for each call may vary depending on the type of call.
For example, if the call was placed from a Centrex or PBX system,
the first few numbers may need to be trimmed before you can make
the call. If the number you want to call is long distance, or if you want
to use a line pool, you may need to add numbers.
To place a call
• Display the log item for the call you want to place.
• Display the associated telephone number. √
• Press
remove.
• Dial any extra digits required.
• Press an external line or line pool button.
• Lift the receiver. (This is not necessary if Handsfree is
programmed at your telephone.) The displayed number is
dialed.

Creating a password to your Call Log

You have the option of accessing your Call Log through a password.
ƒ•°fi
• Press
• Enter your four-digit password. The display reads Repeat New:.
• Re-enter your four-digit password. The display reads
Password changed, which confirms that your password has
been assigned.
To enter Call Log using your password ƒ°⁄¤
• Press
programmed a password, the display reads Password:.
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
or UNDO immediately after accidentally erasing
to exit.
or TRIM, once for every digit that you want to
. The displays reads New passwrd:.
to enter Call Log. If you have
ƒ•°fi
P0857846 Issue 02