Handsfree Answerback - Nortel P0857846 System Coordinator Manual

≠
3. Press
you wish to program. ≠
4. Press
'
5. Press
6. Choose a setting at Handsfree: using the CHANGE button.
There are three ways to set Handsfree for an individual telephone:
For other displays, see "Common feature displays" on page 149.
Both Auto and standard Handsfree allow you to use a headset with
a Norstar telephone.
A Handsfree/Mute button is automatically assigned to a telephone
that is programmed with Handsfree and is always located in the
lower right-hand corner of the telephone.

Handsfree Answerback

Handsfree Answerback allows you to answer a voice call without
lifting the receiver. It is always turned off for an M7100 telephone.
You can turn Handsfree Answerback on or off fora telephone that is
programmed to use Handsfree.
You will need the programming template found at the front of this
guide. See Getting Started for more information.
ƒ••¤flfl‹››
1. Press
P0857846 Issue 02
and enter the internal number of the telephone
twice.
three times.
Handsfree is not available to the telephone.
You can make or answer a call without
©
having to pick up the receiver or press
. The telephone's internal
microphone and speaker turn on
automatically when you press a line or
intercom button to make or answer a call.
A standard version of Handsfree described
"Using Handsfree/Mute" on page 40.
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
Answering calls / 43
.