Making Calls - Nortel P0857846 System Coordinator Manual

Making calls

There are many ways to make a call. Depending on programming
and the type of call, these are the ways to make a call:
• Pick up the receiver and dial. The Norstar system supports three
methods of dialing. See "Changing how you dial your calls" on
page 49.
• Pick up the receiver, press a line button, and dial (if the call is
not on your prime line). ©
• Press
See "Using Handsfree/Mute" on page 40.
©
• Press
receiver and if the call is not on your prime line).
• Press a line button and dial (to talk without the receiver and if
Automatic Handsfree is assigned to your telephone).
• Use one of the features that make dialing easier. See "Time
savers for making calls" on page 55.
Displays
P0857846 Issue 02
and dial (to talk without using the receiver).
, press a line button, and dial (to talk without the
The telephone you have called has no
internal lines available. Press
the Ring Again or Message features or press
to make a priority call.
PRIORITY
You are dialing using Pre-dial. To erase an
√
incorrect digit, press the left end of
complete, select a line or lift the receiver.
This prompt remains on your display as long
as you are on a call you have dialed. To
transfer the call, press
Your telephone is already connected to the
telephone you are trying to call. Check your
active line buttons, and return to that call.
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
LATER
or BKSP . When the number is
.
TRANSFER
to use