Disconnecting One Party; Independently Holding Two Calls; Putting A Conference On Hold - Nortel P0857846 System Coordinator Manual

38 / Answering calls

Disconnecting one party

You can disconnect one party from a conference and continue
talking to the other.
On an M7208, M7310 or M7324 telephone:
• Press the line button of the call that you want to disconnect. The
call that you want to keep is automatically put on hold.
®
• Press
• Press the line button of the held call to speak to the remaining
person.
On an M7100 telephone: ƒ£‹
˙
• Press
®
• Press ˙
• Press

Independently holding two calls

For all Norstar telephones except the M7100 telephone, you can put
the two people in a conference call on hold independently so that
they cannot talk to each other.
• Press the line button of one person. The other person is
automatically put on hold.
˙
• Press
You can re-establish the conference.
• Take one call off hold.
ƒ‹
• Press
• Take the other call off hold.

Putting a conference on hold

You can put a conference on hold, allowing the other two people to
continue speaking to each other by pressing
You can reconnect to the conference by pressing either of the held
line buttons. For the M7100 telephone, press
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
. The call is disconnected.
, to place one caller on hold. Press
again, to put the caller you want to keep on hold.
. The call is disconnected.
to speak to the remaining party.
. The second person is put on hold.
.
˙
.
˙
.
P0857846 Issue 02