Settings Menu; User Menu; Remaining Credit; Dose Settings - LAVAZZA LB 2500 PLUS Instructions For Use Manual

To access and navigate the items within the Set-
tings Menu please use the following functions on
the selection keypad which are each assigned to a
separate button.
Enter
Esc
To access the Settings Menu please start the ma-
chine by pressing and holding the "Enter" button
for approximately 3 seconds. With the keys 4 and 5
the display can be scrolled between the following
items:

User menu

➤
by confirming with "Enter" the "User Menu" is
accessed.

Settings menu

➤
by confirming with "Enter" the "Setting Menu"
requires a password:
PASSWORD
If you do not have a password, it will only be pos-
sible to access the user menu.
Password knowledge on the other hand allows ac-
cess to the settings menu.
USER MENU
1
Press "Enter". You can navigate between the fol-
lowing items in the user menu by using buttons
4 and 5.

Remaining credit

➤

Dose settings

➤

Water softener installation

➤
REMAINING CREDIT
By confirming the "Remaining Credit" item with
"Enter", an indication of the remaining supplies still
available from the machine will appear on the dis-
play.
LAVAZZA LB PLUS
CREDIT 00050
SETTINGS MENU
4
1
2 5
3 6
Press the "Esc" button one or more times to go back
to previous menu levels or to exit the menu.
DOSE SETTINGS
By confirming the "Dose Settings" item with "Enter",
you can change, within preset limits, the different
selection parameters.
In fact the lower level menu allows you to choose
the selection you want to change using buttons 4
and 5.
Product 1
➤
. .
➤
. .
➤
Product 6
➤
Selection of a product with the "Enter" button, then
using the 4 and 5 buttons, gives the following pa-
rameters for which the default values are:
Offset pumps
➤
(allows you to change the pump activation time)
Confirming with the "Enter" key, the following will
appear on the display:
SET UP OK
You can then change the default value using the 4
and 5 buttons.
Every time you press the buttons the activation
time for the parameter you are changing increases
or decreases by 0.5 seconds.
Only in the case of the pumps, if the settings have
been programmed on the basis of dose, a 0.5 in-
crease or decrease corresponds to a dose increase
step calculated in cc.
The selection can then be confirmed using the
"Enter" button. Press the "Esc" button one or more
times to go back to previous menu levels or to exit
the menu.
WATER SOFTENER INSTALLATION
By confirming the "Water softener installation" with
"Enter", the functions of counting the processed li-
tres can be activated or deactivated and the display
shows the corresponding messages.
Activate now
By pressing OK, the message "ACTIVATION IN PRO-
GRESS" is shown and the machine dispenses ap-
proximately half litre of water from the soluble noz-
zle.
E N
0
25