Basic Operation; Turning On The Transceiver - Icom IC-A120 Basic Manual

2

BASIC OPERATION

■ Turning ON the transceiver

Hold down [ ] for 1 second to turn ON the transceiver.
If the transceiver is preset for a start-up password, enter the
6 digits password.
While in the Password Entry mode, "PASSWORD" is
displayed.
3
D Entering the password
Enter the password in the following manner.
KEY
0 1
NUMBER
5 6
Example:
If the password is 513824, push [SCAN], [PRI/DUAL],
[MENU/CLR], [MENU/CLR], [SQL/
[ /MHz/GRP].
• Note that each key represents 2 digits. That means,
"123456" and "678901" are entered in exactly the same
way (requires no multiple or extended pushing.)
• The entered password will not be displayed.
• If "PASSWORD" does not disappear after entering, the
entered password is incorrect. Turn OFF the transceiver,
and then try again.
2 3 4
7 8 9
], and then push