Download Print this page

Icom IC-A120 Setup Instructions

Vfo mode into memory channels for the airband radio

Hide thumbs Also See for IC-A120:

Download this manual

Please refer to the following information for transferring

frequencies from VFO Mode into Memory Channels for the

IC-A120 Airband radio.

The IC-A120E has only the 118.000 MHz frequency programmed as default. Depending on the

airport or location different frequencies will be required.

Memory Channels can also be programmed with software by the supplying Authorised Dealer.

You can enter the frequencies from the front panel.

Dial up the frequency required in VFO mode and then follow the steps as shown in the following

image:

Push MENU/CLR Key:

Confirm VFO MODE appears at the top of the Display and Push MHz / GRP Key:

Need help?

Do you have a question about the IC-A120 and is the answer not in the manual?

Page 1 Please refer to the following information for transferring frequencies from VFO Mode into Memory Channels for the IC-A120 Airband radio. The IC-A120E has only the 118.000 MHz frequency programmed as default. Depending on the airport or location different frequencies will be required.
Page 2 Change to the Frequency you are wanting to enter into Memory with the Up / Down Keys. First Set the MHz side then KHz side (by Pushing MHz / GRP Key): Push MENU/CLR Key to enter the Menu and scroll down with the Up/Down keys to Memory Write.
Page 3 Scroll down with the Up/Down keys to WRITE and Push MHz/GRP Key to enter the mode. Use the Up/Down Keys to Choose YES (it will be filled in when selected) and then Push MHz/GRP to Lock it into Memory.

Ic-a120e