Fan Motor - Samsung DMT300 Series Service Manual

5. The dispenser is fixed to the tub front with a hook.
Use a flat screwdriver to remove it from the tub front.
CAUTION
Be careful as the tub front is sharp.

3.2.9. Fan Motor

1. Open the door completely.
Remove the twelve (12) screws holding the tub front,
frame front, and panel control in place.
CAUTION
Before removing the screws, place a cushioned mat
on the floor to prevent the handle and frame front
from being scratched. After removing them, make
sure to hold the tub front with your hand while you
are working as the tub may close and harm you.
CAUTION
Do not place the removed screws on the tub front.
They may fall into the sump assy.
Copyright© 1995-2010 SAMSUNG. All rights reserved.
2. Remove the fan motor & thermal actuator connectors.
3. Remove the single (1) screw holding the bracket cover
fan in place.
3. Disassembly and Reassembly
3-14