3. Disassembly and Reassembly
3. Disassembly and Reassembly
3.1. Tools for Removal and Reassembly
Tool image
No.
(1)
(2)
(3)
(4)
Preparation for parts replacement
1) Take out the residual water inside the product.
(Drain the water by operating the drain pump)
2) Close the water supply valve.
3) Turn off the power & disconnect power cable.
You must turn off the circuit breaker connected to the product.
4) Pull out the unit from the sink and lay it on the floor.
Be careful of the drain hose when pulling out the unit.
3-1
Tool
Adjustable Wrench
Open-end Wrench
Vice pliers
Others
(screwdriver, nipper, long nose pliers)
Type
1-7/16"
Copyright© 1995-2010 SAMSUNG. All rights reserved.
Remarks
Leg
Common tools for servicing
Screwdriver - Philips, flat,
Torx T20