Heater - Samsung DMT300 Series Service Manual

Hide thumbs Also See for DMT300 Series:

Table of Contents

3. Disassembly and Reassembly

3.2.2. Heater

1. Open the door completely.

Remove the upper and lower baskets.

Place the baskets you've just removed in a safe location

so that they do not interfere with the service operations

and to prevent them from being damaged.

2. Use your hand to hold the lower nozzle and remove it.

Place the removed lower nozzle in a safe location along

with the baskets.

3-3

3. Hold the nozzle duct, and remove it carefully.

To remove it smoothly, remove the hooks clamping the

bracket duct (U) using a flat screwdriver and remove

the hooks clamping the bracket duct (M).

Pull them out while rotating them to the left.

4. Remove the cover heater from the sump assy.

You will need a flat screwdriver for the removal.

To remove a hook from the cover heater, insert the end

of the screwdriver into the gap between cover heater

and cover sump, and push the handle of screwdriver

and the hook.

Remove remain four(4) hooks using same way.

Table of Contents

Show Quick Links

Table of Contents