Distributor Motor - Samsung DMT300 Series Service Manual

Hide thumbs Also See for DMT300 Series:

Table of Contents

3. Disassembly and Reassembly

3.2.5. Distributor Motor

1. Place the dishwasher on its back so that you can see the

base. Remove the two (2) screws that hold the base and

the shutter in place.

2. Remove the leakage sensor connector (white) inside

the shutter.

3. Remove the two (2) distributor motor connectors.

3-9

4. Remove the two (2) screws that hold the distributor

motor in place.

(You can remove one of the two screws through the

hole in the base.)

Pull the distributor motor out.

CAUTION

Be careful removing because it is combine with

rubber seal and distributor valve.

Table of Contents

Show Quick Links

Table of Contents