Table of Contents
Advertisement
Available languages
Available languages
(15) Control LED
(16) Microphone
(17) Mode-button
(18) Down-button
(19) Up-button
INSTALLATION
Installing/Replacing the lamp
The lamp must only be changed when wearing appropriate protective clothing (protection glasses, protection
gloves, helmet with sight, leather apron).
The lamp life given by the manufacturer must never be exceeded. This is why you need to take notes on the
operational time of the lamp and replace the lamp in time.
Keep exchanged lamp in a protective container and remove accordingly.
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
25/25
DJ_SCAN_200_250_V_1_2
Advertisement
Table of Contents
Need help?
Do you have a question about the DJ-SCAN 200 and is the answer not in the manual?