Download  Print this page

Feed Dog Height - ELNA 6005 heirloom edition Service Manual

Hide thumbs

Advertisement

PDFMAILER.DE
The highest position of the feed dog should be between 0.80 and 0.90 mm from the surface of
the needle plate when the pressure dial is set at 3 and the presser foot is lowered.
1.
Set the pressure dial at 3 and lower the presser foot.
2.
Turn on the power switch.
3.
Remove the bed cover (see page 10).
4.
Turn the balance wheel toward you to set the feed dog at the highest position.
5.
Loosen the screw A and the nut B.
6.
Adjust the feed dog height by turning the adjusting screw C.
7.
Tighten the nut B and the screw A.

FEED DOG HEIGHT

18

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: