Feed Dog Height - ELNA easy cover Service Manual

w
q
0.75-0.95 mm
e
q

4. Feed Dog Height

Turn the handwheel toward you to raise the feed dog to
its highest position.
When the presser foot is lowered, the maximum height
of the feed dog should be 0.75-0.95 mm above the
needle plate.
z Set the stitch length dial at 3 and differential feed dial
at 1.0.
x Lower the presser foot and turn the handwheel
toward you to raise the feed dog to its highest
position.
c Open the looper cover and loosen the setscrews q.
v Move the main w and sub e feed dogs up or down
to set the height at 0.85 mm.
b Tighten the setscrews q firmly.
9