Download  Print this page

Upper And Lower Tension - ELNA 6005 heirloom edition Service Manual

Hide thumbs

Advertisement

PDFMAILER.DE
Check: Set the upper thread tension dials F to 3. The standard upper tension should
be 75 - 90g when pulling the thread (cotton thread 50/3) in direction C.
Adjust the upper tension:
1. Set the thread tension dial F to 3.
2. Open the face plate and adjust the thread tension by turning the thread tension screw D
in the direction of
A
for loosen the tension
B
for tighten the tension
3. Close the face plate.
Check: The correct factory setting of the lower thread tension is 9 to 11 g, measured with a
cotton thread no 50/3.
Adjust the lower tension:
1. Turn the screw E to adjust the lower tension in direction to
A
for loosen the tension
B
for tighten the tension.

UPPER AND LOWER TENSION

20

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: