Service Mode For The Drive Unit - Pioneer MEP-7000 Service Manual

5

6.2 SERVICE MODE FOR THE DRIVE UNIT

This is a service mode that the drive unit mainly controls.
Memo: If an external monitor is connected via the MONITOR OUT connector, signals are forcibly output to the external
monitor regardless of the UTILITY setting.
This will ensure that this unit can be repaired when the center display is in failure.
How to Enter This Service Mode
Connect the control and drive units.
While holding the DISC 2 EJECT and USB 2 STOP keys of
the drive unit pressed, turn the unit on.
(Hold the keys pressed until the PRO DJ logo on the display
disappears.)
How to Operate
From the initial display shown above, pages of this Service mode can be changed,
using the Select Down or USB STOP 2 key to move forward or Select Up or USB STOP 1 key to go back.
Error history
Version information
Auto device diagnosis
LD status (LD current)
LD status
(accumulated time of LD light emission)
DVD/CD drive diagnosis
RESET OF DVD/CD DRIVE DATA
MANUAL INPUT OF DVD/CD DRIVE DATA
USB STOP 1 key
5
6
Initial display
USB STOP 2 key
MEP-7000
6
7
Hold these keys pressed simultaneously.
Select Up or Select Down or
USB STOP 1 key USB STOP 2 key
Select Up key
7
8
A
B
C
D
E
Select Down key
F
87
8