Pioneer MEP-7000 Service Manual page 118

1
Updating Tools
A
There are three tools for updating.
Updating in Normal Style mode can be performed with either of the three tools and must be performed
with both the control and drive units connected. Updating in Manipulator Style mode can be performed
only using the Firmware Updating program, which is the only possible way of updating for the SEP-C1.
Method
Connect the USB storage device on
USB storage
which the updater files have been
copied to the USB 1 (on the rear) or
device
USB 2 (on the front) connector of this unit.
B
Load the CD-ROM (CD-R/RW) to which
CD-ROM
the updater files have been copied in the
(CD-R/RW)
DVD/CD drive of this unit.
Firmware
Connect the PC and this unit with the
USB cable then activate this program.
Updating
(The dedicated USB driver must have
Program
been installed on the PC beforehand.)
(DJS)
Normal Style mode
C
Firmware Updating Program (DJS)
D
E
Manipulator Style mode (The SEP-C1 is assumed.)
F
Firmware Updating Program (DJS)
118
1
2
How to operate
: Recommended
MEP-7000
2
3
Normal Manipulator
Style Style
Format the USB storage device
in FAT/FAT32/HFS+.
A DVD-ROM disc is not
supported.
This program is created from part
of the DJS functions and offered
from the Design Department to
the PSN each time the firmware
is updated.
: Possible
CD-ROM USB storage device
3
4
Remarks
: Impossible
4